So many choices...

In the world of high performance R/C cars and trucks you have many choices on modifications and upgrades to your existing model. You can change and modify almost everything about these cars from a-arms to paint jobs the possibilities are endless. If you feel the need for speed you will find the 5th scale model cars will do the trick especially with the Gabe Brown Engineering velocity stack and tuned race pipe for 23 cc to 30.5 cc Zenoah and CY gasoline engines. These bolt on high performance components work with stock and modified engines currently fitting the HPI baja 5b off-road buggy.

Tangent! Needing to help redesign the bland design of my steadfast site. Views concerning the whole design at Really Freeze Dried Candy if seeking within the general Nova Scotia area. Offer an opinion. Appreciate it!

Which bolt on components are right for you?

Currently Gabe Brown Engineering offers three velocity stacks, two for cars and one for 5th scale R/C boats. We offer the gasoline version which is designed to work with the choke plate standard on the RTR version as well as the SS kit version of the baja 5b gasoline engines. We also offer the version which fits the alky carberator for those who wish to go faster using this type of fuel instead of 91 pump gas. The new marine version of the velocity stack will work with most 5th scale R/C boats using the Zenoah and CY gas engines. With our line of high performance tuned pipes these components are performance engineered and manufactured in the U.S.A. for modelers everywhere.

Where do you run your 5th scale RC car?

5th scale model racing is fast becoming very popular here in the states with tracks starting to pop up all over America. In Southern California we currently have three or four known tracks that a 5th scale R/C car can run on, one of which is still being made, HotBoxRC track in Santa Ana California. The open tracks are the Sun Valley Raceway, The Milestone Ranch MX Park and there is a new track in San Diego which the GBE team has not been to yet however we do plan on getting over to it in the future.

Thank you folks! I have texted a friend that I could certainly list his superb home inspection service in New Jersey that careses, through a web-site post. If you'll be shopping to find a property and home inspection service around the outlying NEW JERSEY region, they absolutely were incredible.

And finally, I really want to note the base concept for this specific content has been provided via Ashley with Macpower group. They absolutely are an amazing heavy equipment dealers. We invariably enjoy a smart pitch!

Inspirations For This Article - Extremely nice site.

Posted in Home Improvement Post Date 10/11/2017






Start typing and press Enter to search

  • Dalhousie Woodchip Loading Facility

    Truck Receiving:
    WEIGHTRONICS 100 ton 90′ (27.432 m)

    Chip Van Receiving:
    50T 45 B.I.D. Canada Transportable Truck Dumper c/w Hydraulic Power Unit

    Screw Reclaimer:
    B.I.D. Canada 800 tons per hour 3 Screw Reclaim and Lump Breaker

    Conveyor System:

    3 stage free fall fixed conveyor rated at 600 tons per hour
    48″ Belt with Cleats
    Air draft is of 17.5 m

    Outreach of ship loader to fender fence
    11 m min to 16.2 m max

    Storage Capacity: (Roundwood)
    20,000-ton capacity roundwood

    Storage Pad Capacity: (Wood Chips)
    12,000 m2 – 5″ Highway Grade Asphalt Pad
    42,000 Ton Capacity

    Wharf: (West)
    Load limit Structure (H20-S16 Max Railway Loading)
    Wharf face has 26 Bollards over a 355 m length
    Max low tide 10.3 Draft

  • Sheet Harbour Shiploading Terminal

    Chip Pile Reclaim:
    B.I.D. 3 Screw Reclaim
    & Lump Breaker

    60″ wide, fixed & moveable ERIEZ Electromagnet for 60″ belt MILLTRONICS 60″ belt scale.

    Self-powered Moveable Conveyor Loader

    Ship Trimmer:
    SVEDALA 4-42″ Jet Slinger

    152 m long concrete caisson structure, built 1987 Mooring Buoys & two 100 ton land bollards Maximum loaded draft 11.0 m at LLW, tide + 1.5 m Tugboat service, up to 5000 hp available.

    Loading Capacity (max):
    1200 tons per hour

  • Sheet Harbour Chipping Facility

    Truck Receiving:
    WEIGHTRONICS 100 ton
    80 ft (26m) scale

    Chip Van Receiving:
    RADAR 65 ton 65 ft (20m)
    fixed truck dump

    B.I.D. CANADA 50 ton
    portable truck dump

    FUJI-KING KD/4-90
    Trough Debarker, 90 ft (27m)

    CAE Machinery 76″
    – 8 knife chipper

    ERIEZ Electromagnet
    for 30″ belt

    B.I.D. Disc Scalping Screens
    B.I.D. Twin 24″ Distribution Screw Conveyors
    2 – BM&M 12′ x 20′ Gyratory Twin Deck Screens
    48″ – 8 knife re-chipper

    Storage Capacity:
    Roundwood – 50,000 tons

    Chips – 8″ (200 mm)
    14,000 m2 cement pad

    Additional chip storage
    area – 6,000 m2

    Chips – total storage
    120,000 tons

    Testing Lab:
    2 – ovens
    Chip analyzer

    Production Capacity:
    400,000 tons per year

  • Recent Posts